Austria VapeCon starter kits starter bundle (2026) (v8)
VapeCon starter kits advice for Austria, covering coil types, what to look for and where the trade-offs actually sit.
Finding the right vapecon starter kits in Austria is easier than most catalogues make it sound. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
Anyone who has compared vapecon starter kits options in Austria quickly learns that specification lists only tell part of the story. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Charging over Type-C fast charge takes about 81 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 800 mAh cell holds a usable charge for most of a day at 200 and recharges over Type-C fast charge.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 200, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
The Stealth Grey finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. For beginners, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense.
In Austria, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Specifications
Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.
| Reference model | RELX Pro |
|---|---|
| Brand family | Innokin |
| Battery capacity | 800 mAh |
| Power range | 200 W |
| Liquid capacity | 2.5 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 80:20 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | magnetic contact |
| Airflow | adjustable sliding |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Strawberry Cream: creamy, sweet, described as smooth strawberry custard with a light dairy note. On a 80:20 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.
