VapeCon starter kits for flavour seekers: what works (v2)
VapeCon starter kits advice for Austria, covering explained, what to look for and where the trade-offs actually sit.
The Austria market for vapecon starter kits has grown steadily, and the choice on offer now is genuinely broad. What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 35:65 PG/VG liquid sitting in the chamber.
Most Austria buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Charging over Type-C fast charge takes about 44 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
In Austria, availability of the 0.8 Ω mesh coil is the practical bottleneck, not the device itself. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 35:65 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
The 4.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1185 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Delivery across Austria is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω mesh mark before the profile flattens and a swap makes sense.
Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below. For flavour seekers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω mesh mark before the profile flattens and a swap makes sense.
Specifications
Every unit in the Geekvape Aegis family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Geekvape Aegis |
|---|---|
| Brand family | Eleaf |
| Battery capacity | 2000 mAh |
| Power range | 70 W |
| Liquid capacity | 4.0 ml |
| Coil | 0.8 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 35:65 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | dual bottom |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 35:65 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
