VapeCon starter kits buying guide for Austria (1.2 ohm mesh)
VapeCon starter kits advice for Austria, covering legal status, what to look for and where the trade-offs actually sit.
We spent weeks putting vapecon starter kits options through their paces so the recommendations here reflect real use. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation.
Budget matters in Austria, but with vapecon starter kits the cheapest option is rarely the one that lasts. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation.
Airflow control on the Smok Morph is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 30, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
We would pair the Smok Morph with a 40:60 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Charging over Micro-USB takes about 89 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation. Battery behaviour is where the Smok Morph earns its keep: the 650 mAh cell holds a usable charge for most of a day at 30 and recharges over Micro-USB.
The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1139 full puffs from a charge at 20 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock.
Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. Delivery across Austria is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Smok Morph is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Smok Morph |
|---|---|
| Brand family | Geekvape |
| Battery capacity | 650 mAh |
| Power range | 30 W |
| Liquid capacity | 1.6 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 200 ml |
| Liquid ratio | 40:60 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | ring control |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Classic Menthol: cool, sharp, described as clean peppermint with consistent coolness. On a 40:60 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Availability shifts often, so check the current listing before committing to a large order.
