VapeCon starter kits storage: detailed edition (0.15 ohm dual mesh)
VapeCon starter kits advice for Austria, covering storage, what to look for and where the trade-offs actually sit.
Finding the right vapecon starter kits in Austria is easier than most catalogues make it sound. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock.
Most Austria buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The throat hit is noticeably firmer than a 60:40 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Charging over Micro-USB takes about 31 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the Asvape Minikit earns its keep: the 1200 mAh cell holds a usable charge for most of a day at 200 and recharges over Micro-USB.
What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber. The Forest Green finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.
For value hunters, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 60:40 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 5.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1738 full puffs from a charge at 12 mg/ml, based on average session length in our testing.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Asvape Minikit |
|---|---|
| Brand family | RELX |
| Battery capacity | 1200 mAh |
| Power range | 200 W |
| Liquid capacity | 5.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 2.0 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | adjustable sliding |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
