Where to buy VapeCon starter kits in Austria (Cinnamon Danish)
VapeCon starter kits advice for Austria, covering starter kits, what to look for and where the trade-offs actually sit.
Anyone who has compared vapecon starter kits options in Austria quickly learns that specification lists only tell part of the story. In Austria, availability of the 0.2 Ω dual mesh coil is the practical bottleneck, not the device itself.
Local availability in Austria shapes the practical answer more than the marketing does. Charging over Type-C fast charge takes about 94 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.2 Ω dual mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. The Emerald finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
The build quality on Lost Vape Thru is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Emerald finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.2 Ω dual mesh mark before the profile flattens and a swap makes sense.
Replacement coils are widely available, and the 0.2 Ω dual mesh coil is the sensible default to keep in stock. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. What surprised us most was how little the 0.2 Ω dual mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber.
In Austria, availability of the 0.2 Ω dual mesh coil is the practical bottleneck, not the device itself. Charging over Type-C fast charge takes about 94 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Lost Vape Thru |
|---|---|
| Brand family | Beipu |
| Battery capacity | 1000 mAh |
| Power range | 150 W |
| Liquid capacity | 5.0 ml |
| Coil | 0.2 Ω dual mesh |
| Bottle size | 1.0 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | dual bottom |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Frozen Berry Sorbet: sweet, icy, described as cold berry inhale with a soft exhale. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
