First Device VapeCon starter kits explained (1500 mAh)

VapeCon starter kits advice for Austria, covering first device, what to look for and where the trade-offs actually sit.

Budget matters in Austria, but with vapecon starter kits the cheapest option is rarely the one that lasts. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below.

The gap between a mid-range and a premium vapecon starter kits narrows once you know which components you actually use. In Austria, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself.

Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense.

If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. In Austria, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.

Pricing in Austria shifts with import duty, so the figures here reflect current EUR rates rather than a fixed list price. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 60, and pushing beyond that adds heat rather than anything worth carrying.

Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber.

Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below. For cloud chasers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense.

The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Vapour production is more than adequate at 60, and pushing beyond that adds heat rather than anything worth carrying.

Specifications

Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.

Flavour and performance notes

A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.

Practical considerations in Austria

Availability in Austria is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.

If you would rather talk it through, use the contact details below and we will answer directly.