Choosing VapeCon starter kits: rechargeable users edition (60 W)

VapeCon starter kits advice for Austria, covering maintenance routine, what to look for and where the trade-offs actually sit.

Budget matters in Austria, but with vapecon starter kits the cheapest option is rarely the one that lasts. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

We spent weeks putting vapecon starter kits options through their paces so the recommendations here reflect real use. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.

Vapour production is more than adequate at 30, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.

Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 60 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.2 Ω dual mesh coil is the newer generation.

The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.

Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. For rechargeable users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

We would pair the RELX Pro with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.2 Ω dual mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.

Battery behaviour is where the RELX Pro earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 30 and recharges over Micro-USB. Expect roughly 416 full puffs from a charge at 12 mg/ml, based on average session length in our testing. The throat hit is noticeably firmer than a 20:80 PG/VG blend, so if you prefer a smoother draw, mix accordingly.

Specifications

Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.

Flavour and performance notes

A representative profile is Cinnamon Danish: sweet, spiced, described as cinnamon pastry with a light glaze. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.

Practical considerations in Austria

Availability in Austria is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.

If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.